E Type Rotating Joint The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately. The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately. Size Model Material A±5 (mm) B±5 (mm) Flange specifications and type Exterior coating selection Carbon steel Stainless steel 2” CD-SJ50(E) √ √ 212 345 Specifications: □ ANSI 150# □ JIS 10K □ Other ________ Type: □ RF □ FF Coating: □ Red □ Yellow □ Other ________ 2.5” CD-SJ65(E) √ √ 263 396 3” CD-SJ80(E) √ √ 295 440 4” CD-SJ100(E) √ √ 382 540 6” CD-SJ150(E) √ √ 516 696 E Type rotating joint Model CD-SJ (E) Water inlet/outlet joint type ANSI 150# or JIS 10K FF or RF flange Designed pressure 150～225PSI （10.5～15.8 kgf/cm2） Operating pressure 100～180PSI （7～12.3 kgf/cm2） Test pressure 355PSI （25 kgf/cm2） Material 1. Body: Carbon steel or stainless steel SUS304 2. O-ring: NBR 3. Ball bearings: Stainless steel SUS304 Coating Yellow or red; other colors are available based on customer demand
