Automatic swinging fire protection water monitor This product is driven by the water pressure of the hydrant water. The water route can be switched by the fixed angle reverse direction changing device so that the monitor can swing automatically within the set angles. The swinging monitor can be placed on a stand, where it can spin 360° and the direction can be fixed. The angle of the water outlet of the monitor can be adjusted vertically and fixed. The total weight of the monitor is less than 78kg with two 2.5" internal thread joint inlets. As such, it can be operated with 1 or 2 water hoses connected. This product is driven by the water pressure of the hydrant water. The water route can be switched by the fixed angle reverse direction changing device so that the monitor can swing automatically within the set angles. The swinging monitor can be placed on a stand, where it can spin 360° and the direction can be fixed. The angle of the water outlet of the monitor can be adjusted vertically and fixed. The total weight of the monitor is less than 78kg with two 2.5" internal thread joint inlets. As such, it can be operated with 1 or 2 water hoses connected. The monitor can spray a strong water column or water mist, which can isolate the heat with a water curtain, reduce the temperature, and extinguish fires in dangerous areas where fires can easily occur, such as oil tank areas, chemical plants, machine rooms, solvent warehouses, oil filling plants, etc. The high mobility of this product is especially effective in extinguishing fires in the blind spots of the aforementioned areas and places which the water of hydrants cannot directly reach. For the CJ500 water mist/water column nozzle of this product, apart from the standard bronze material, the customers may also purchase an aluminum nozzle as shown below: Standard accessory/Bronze/Material umber: A11011A Optional accessory/Aluminum/Material Number: A11015A Automatic swinging fire protection water monitor Specifications Mobile Fixed Material Body, base, nozzle, rapid internal thread joint: BC-6 Protecting cover: aluminum alloy Tripod, retaining button, retaining bolt: SUS304 stainless steel Body, base, nozzle, rapid internal thread joint: BC-6 Protecting cover: aluminum alloy Model AOM-100 Water outlet 3"-12UN screw thread 3"-12UN screw thread Water inlet size 2-1/2" rapid internal thread joint X2 with check valve 4" X 150# RF/FF flange joint Flow 350gpm (straight water column) or 500gpm (pure water mist) under a water pressure of 7kgf/cm2 350gpm (straight water column) or 500gpm (pure water mist) under a water pressure of 7kgf/cm2 Operating pressure 5~14kgf/cm2 5~14kgf/cm2 Range 52M (straight water column) or 10M (pure water mist) under a water pressure of 7kgf/cm2 52M (straight water column) or 10M (pure water mist) under a water pressure of 7kgf/cm2 Adjust angles horizontally 360°, can be fixed at any angle 360°, can be fixed at any angle Adjust angles vertically -15°~85°, can be fixed at any angle -15°~85°, can be fixed at any angle Swinging angle 110° (spinning range can be reduced) 110° (spinning range can be reduced) Pressure gauge specifications Φ60MM – 1/4”PT，0～20 KGF/cm2 Φ60MM – 1/4”PT，0～20 KGF/cm2 Weight approx. 76kg approx. 70kg
